The Firestone air compressors such as # F9377 can handle typical moisture like what might splash up from the road when driving in the rain. But it is not designed to be submerged under water. For something to be waterproof it has to be able to be submerged under water for a certain amount of time and not let any water in.
It will be perfectly fine under your truck so long as you aren't planning on driving into any deep bodies of water! That is why Firestone makes a mount bracket, # F2530,... view full answer...
I spoke with my contact and B&W and the Custom Headache Rack # BWPUCP7500WA is made of 10 gauge steel except for the flat plates that attach to the bed sides. Those are 7 gauge.
This rack is not tested with toolboxes or tonneau covers so it is difficult to determine if it will work in conjunction with those items. It likely will not work if the tonneau cover blocks the lip in the inner part of the bed sides. view full answer...
The RC Industries # UB1818-48 body of the box is made from 14 gauge steel, plus the door itself is made from 2 separate 14 gauge steel panels, for added durability. This box weighs in at 134-lbs and is manufactured in the USA. It sounds like this is going to be the heavy duty box that you're looking for! view full answer...
We do have A-frame trailer tongue toolboxes that are made in the USA, though the MaxxTow MaxxHaul Trailer Tongue Toolbox is made in China.
Like you mentioned, the RC Manufacturing toolboxes are made in the USA and are a very high quality toolbox. It has a locking handle to protect your tools, a weatherproof seal to keep them dry, and a gas strut that keeps the lid open while you find what you need so you don't have to hold it up. These A-frame toolboxes are available in black or silver... view full answer...
The DeeZee Specialty Series Aluminum Truck Box you referenced, part # DZ71, is constructed of Brite-Tread aluminum that is .090 inches thick. view full answer...
The Underbody Truck or Trailer Toolbox, 36x18x18, item # UB1818-36, is constructed of minimum 14 gauge steel and in some places uses 13 gauge steel for strength. These boxes are manufactured in the U.S.A. view full answer...
I have a great solution for you. I called my contact at DeeZee, and they confirmed that the DeeZee Custom-Fit Truck Bed Mat # DZ86973 is completely waterproof. The mat will not allow water to pass through the material.
In order to find an alternate option, I called my contact at Performance Tool. They carry the Non-Slip Mat - Multi-Purpose - Washable - 84" x 16" # PT67ZR that has spaces between the fibers that water can pass through. It is fully washable and mold/mildew resistant. Also,... view full answer...
The RC Industries Z-Series Underbody Truck Toolbox you mentioned, part # UB1416-24 is constructed of 14 gauge powder coated steel. The T-Handle is constructed of stainless steel. view full answer...
The Stromberg Carlson 4000 Series # VGD-10-4000 weighs roughly 32-lbs.
It should be noted that this tailgate isn't necessarily going to increase what the truck's payload much, if at all, but they're instead designed to reduce the damage that might otherwise occur when towing a 5th wheel trailer with a pin box that hangs close to the tailgate. These tailgates also reduce drag that ultimately will help improve gas mileage. view full answer...
Derale transmission coolers like Series 7000 Tube-Fin Cooler # D13311 are USA-made. This particular cooler is a Class I-rated unit intended for subcompact cars. We offer similar Derale coolers, again USA-made products, that are designed for your 1994 Chevrolet C/K Series Pickup.
You can use the link provided to see all trans coolers for your truck. Just use the menu tool at the top of the page to select your drivetrain to then see suitable coolers for your pickup. You can use the largest... view full answer...
If you got something like this Adapter 7 Pole to 4 Pole with Tester # 47345 you will be able to convert your 7 pole to the 4 pole you need to power your light # CR-007G, you can also test to see if everything is working. If everything is, I think you may have an issue with your wiring with your factory 4 pole. You may also want to check your fuse box for a blown fuse. Also try to check your factory wire connection under your truck bed. view full answer...
I pulled one of the Multipurpose Utility Light, part # ILL24CB from the warehouse and manually counted the diodes. There are a total of 36 diodes in the light in three rings, one of 18, one of 12 and one of 6. view full answer...
The part # 311-SWDA24A55 you asked about is the "original" Pace Edwards SwitchBlade Hard Tonneau Cover whose cover is aluminum and has a "vinyl grain" finish according to the manufacturer.
This is different from the Pace Edwards SwitchBlade Metal Hard Tonneau Cover # 311-SMDA24A55 which has a gloss black finish.
Both of these tonneau covers are fits for your 2019 Ram 1500 with a 5-1/2 foot bed (without Ram Box) and are no-drill installs. The SwitchBlade is one of the sleekest looking... view full answer...
Most of the gooseneck hitches we have available, like the B&W # BWGNRK1104 or the Draw-Tite # 9465-37 are constructed of steel, but not stainless steel because it's strength relative to higher grades of steel. To my knowledge there is not a hitch that is made with 100% stainless steel components on the market, but most of the hitches do have some stainless steel components like the hitch ball or the safety chain loops.
When it comes to the best available gooseneck hitch on the market,... view full answer...
You should have no problem using the Convert-A-Ball Gooseneck Coupler Adapter, # CAB-C5G, on a 1,200 mile trip as long as the gross weight of your trailer remains under 20,000 lbs and the pin weight is under 4,000 lbs. We had one customer comment that he has been using his adapter for over 20,000 miles and it is still working great.
The only note I would add to this adapter is that there will be a noticeable difference in the ride quality if you are used to towing with a fifth wheel hitch.... view full answer...
Go To Results